:تحديثــات: Octoplus / Octopus Box Samsung v.2.3.7 - reset FRP boost

    Octoplus / Octopus Box Samsung Software v.2.3.7 is out!

We have added support for Samsung Galaxy XCover, Samsung Galaxy J7, Samsung Galaxy S6 and many other models!

Octoplus / Octopus Box Samsung Software v.2.3.7 Release Notes:

  Added support for the following models:

    - SM-G389F - added Direct Unlock, Read Codes, Fast Unlock, Fast Read Codes, Read/Write Cert, Read/Write security, Read/Write EFS, Write Firmware, Read PIT
    - SM-J710F - added Reset FRP (auto-enable ADB)
    - SM-J710FN - added Reset FRP (auto-enable ADB)

    Added Reset FRP via ADB for next devices (ADB must be enabled):

    - SM-G890A
    - SM-G920A, SM-G920AZ, SM-G920D, SM-G920F, SM-G920FD, SM-G920FZ, SM-G920I, SM-G920K, SM-G920L, SM-G920S, SM-G920T, SM-G920T1, SM-G920W8
    - SM-G9250, SM-G925A, SM-G925F, SM-G925FQ, SM-G925I, SM-G925K, SM-G925L, SM-G925S, SM-G925T, SM-G925T1, SM-G925W8
    - SM-G9287, SM-G9287C, SM-G928C, SM-G928F, SM-G928G, SM-G928I, SM-G928K, SM-G928L, SM-G928N0, SM-G928S, SM-G928T, SM-G928W8
    - SM-G9300, SM-G9308, SM-G930F, SM-G930FD, SM-G930K, SM-G930L, SM-G930S, SM-G930T, SM-G930T1, SM-G930U, SM-G930V, SM-G930W8
    - SM-G9350, SM-G935D, SM-G935F, SM-G935FD, SM-G935J, SM-G935K, SM-G935L, SM-G935S, SM-G935T, SM-G935T1, SM-G935U, SM-G935V, SM-G935W8
    - SM-J105B, SM-J105F, SM-J105H, SM-J105Y
    - SM-J120A, SM-J120AZ, SM-J120F, SM-J120FN, SM-J120G, SM-J120M, SM-J120P, SM-J120W, SM-J120ZN
    - SM-J200BT, SM-J200F, SM-J200G, SM-J200GU, SM-J200H, SM-J200M, SM-J200Y
    - SM-J210F, SM-J210FD
    - SM-J320A, SM-J320AZ, SM-J320F, SM-J320FN, SM-J320G, SM-J320H, SM-J320M, SM-J320MU, SM-J320ZN
    - SM-J321AZ
    - SM-J5108, SM-J510F, SM-J510FN, SM-J510G, SM-J510H, SM-J510K, SM-J510L, SM-J510N, SM-J510S, SM-J510U
    - SM-N9200, SM-N9208, SM-N920A, SM-N920C, SM-N920CD, SM-N920F, SM-N920G, SM-N920I, SM-N920K, SM-N920L, SM-N920S, SM-N920T, SM-N920T, SM-N920W8
    - SM-N9300, SM-N930A, SM-N930F, SM-N930FD, SM-N930K, SM-N930L, SM-N930P, SM-N930R4, SM-N930S, SM-N930T, SM-N930U, SM-N930W8

     Combination firmware versions for most models are uploaded into the Support Area ("COMBINATION" folder)

  New Cert files were uploaded into the Support Area! (thanks to mr.Ca0ss)

  All supported operations described in details in the manual ("Cable & Manual" button in the software)


To remove FRP lock you can try to do the following:

    Write "boot.img" partition from appropriate Combination firmware via "Advanced mode" option (select combination firmware, un-check partitions except "boot.img")
    Perform "Reset FRP" operation in the software

or..

    Write Full Combination Firmware
    Go to "Developer Options" in the phone’s Settings
    Check "Enable OEM unlock" option
    Perform Factory Data Reset
    Re-flash the phone with full stock (original) firmware



Note: "boot.img" from combination firmware can be not compatible with current phone's firmware. In that case phone will stuck on logo, or will be rebooting after writing of such boot. To restore the phone to its initial condition you need to re-flash it with different full stock (original) firmware (or try to write only boot of such firmware).

Note: You can write "boot.img" combination firmware or to downgrade phone's firmware version only on your own risk!

PS: If you cannot find combination firmware for your model inside "COMBINATION" folder in support area, this means we don’t have this files at the moment.