:تحديثــات: Octoplus JTAG PRO Software v.1.2.9 Ny_octoplus_JTAG

    Octoplus JTAG PRO Software v.1.2.9 is out!

Dear friends!

We wish you and your family a sweet and beautiful New Year! Let this time bring happiness, love, and prosperity to your home and life.
May every day of the new year bring pleasant events, satisfaction from your achiements, new horizons, and happiness!
Thank you for every day out of 365 days we’ve spent together. Be sure we will further please you with new regular updates!

Please note, that we will be on holidays from December 29th till January 3rd. All support issues will be postponed during this period. See you next year!

Octoplus Box Team
******************************************


    Released new Samsung eMMC features: «Smart Report», «Factory Format», «Write CSD», «Write/Update firmware»).
    Released writing firmware via USB for devices, based on Qualcomm CPUs (Qualcomm raw images with «rawprogram0.xml», «patch0.xml»).

    Octoplus Box JTAG PRO Software v.1.2.9 Release Notes:

  **** Added new features for Samsung eMMC chips:

            Samsung Smart Report
            This feature shows extended info (check state) of Samsung eMMC chip such as:
            number of eMMC banks, initialization bad block count, optimal trim size and other information.

            Samsung eMMC Factory Format
            This feature is intended to format Samsung eMMC chips.
            Note, that after performing Factory Format operation all eMMC data will be erased!

            Samsung eMMC Write CSD
            This feature allows you to write data to CSD register in Samsung eMMC chips.

            Samsung eMMC Write/Update firmware
            This feature allows you to update/write eMMC firmware on Samsung eMMC chip.
            If eMMC is not connected in Normal (General) Mode, to write eMMC firmware you should force it into Boot Mode using TestPoint.
            With this update we have added support and firmware for the following Samsung eMMC chips:


                - KMVTU000LM-B503 [VTU00M]
                - KMN5U000ZM-B203 [N5U00M]
                - KMKJS000VM-B309 [KJS00M]
                - KMK5U000VM-B309 [K5U00M]
                - KMJJS000WM-B409 [JJS00M]
                - KLMCG8GE4A-A001 [MCG8GA]
                - KLM8G1WE4A-A001 [M8G1WA]

            List of supported Samsung chips will expand in future software updates.

            To write/update firmware in mentioned above eMMC chips, do the following:
                Select «eMMC» interface option
                Select «Brand: eMMC_chips»
                Select eMMC chip part number in «Model:» software list
                Press «Help» button to view eMMC pinout and TestPoint picture. Acknowledge the manual.
                Solder all necessary wires to connect eMMC (if necessary, solder TP wire to force eMMC into Boot Mode, Product name will be displayed as 000000)
                Press «Connect» button to connect eMMC (if necessary, connect TP to GND)
                When connection is successful, release (disconnect) TP wire from GND and go to «eMMC service» tab in the software
                Press «Write/Update firmware» button, select proper eMMC chip from the list and press "Write/Update eMMC firmware" button


            NOTE: PLEASE DON’T SELECT INCORRECT eMMC (WITH NON MATCHING PART NUMBER)! WRITING INCORRECT FIRMWARE WILL DAMAGE YOUR EMMC!

   *** Box firmware has been updated! To update firmware automatically, it is necessary to connect the Box and only then run the software.

        Also, you can update Box firmware manually via «Update Box Firmware» button at «Welcome» tab in Octoplus JTAG PRO software.


        Note, it won't be possible to use mentioned above Samsung eMMC features without updating Box firmware!

     *** Released writing factory firmware via USB for devices, based on Qualcomm CPUs.


        This feature («Repair devices based on Qualcomm CPU’s using XML files (*.xml)») allows you to Repair/Write factory firmware on devices,
        based on Qualcomm CPUs using firmware with «rawprogram0.xml» and «patch0.xml».
        To make Repair/Write firmware, do the following:

            Connect the device to PC in «Qualcomm…9008…» Mode. If necessary, use TP
            Select «USB» interface option
            Select «Brand: Custom Setting»
            Select proper «Device (Core)»
            Select proper Qualcomm loader in «Loader» list
            Press «Connect» button and wait while device will be connected
            Go to «Factory repair» tab
            Press «Repair devices based on Qualcomm CPU’s using XML files (*.xml)» button
            Select «rawprogram0.xml» and «patch0.xml» files
            Press «Write» button to write selected firmware

        Note: some firmware’s XML may contain «modemst1» and «modemst2» partitions for writing.
        Writing of these partitions may lead to loosing phone’s IMEI and calibration data.
        Software will automatically deselect and skip writing of these partitions. If you need to write these partitions, you should manually 

iiii 
Spoiler :

ii