:تحديثــات: Octoplus/Octopus Box LG Software v.2.5.8

Octoplus/Octopus Box LG Software v.2.5.8 Release Notes:

   * Added world's first "Repair Network" operation (enable editing of APN) without root for the following models*:

    - LS450 (thanks to mr. Kolesik)
    - LS991 (thanks for testing to mr. Cafonabob1 and mr. LEr)
    - LS996, LS675
    - LS775, LS676 (test mode)

    * Added support for the following models:

    - F800K - added Direct Unlock, Repair IMEI, Reset FRP Lock, Read/Write NVM, Read/Write QCN, Read/Reset Security, Read Full Flash, Write Firmware
    - K425 - added Direct Unlock, Repair IMEI, Reset Screen/FRP Lock, Read/Write NVM, Read/Write QCN, Read/Write/Reset Security, Read Full Flash, Repair BT/Wi-Fi MAC Address, Read/Write Firmware
    - K450 - added Direct Unlock, Repair IMEI, Reset FRP Lock, Read/Write NVM, Read/Write QCN, Read/Write/Reset Security, Read Full Flash, Repair BT/Wi-Fi MAC Address, Read/Write Firmware
    - K520Y - added Direct Unlock, Repair IMEI, Read/Write NVM, Read/Write QCN, Read/Write/Reset Security, Read Full Flash, Repair BT/Wi-Fi MAC Address, Read/Write Firmware

   * Added "Write Firmware" operation for the following models:

    - D100, D100AR, D100F, D100G, D100J
    - D105, D105F

   * Added "Factory reset" (Factory reset 2/3) operation for the following models:

    - D722, D722AR, D722J, D722P, D722PA, D722V
    - D722K (thanks for testing to mr. Coderinside)
    - K420N, K420NM, K420PR
    - K420DS (thanks for testing to mr. Zone3)

*Note:

    To perform "Repair Network" operation, you must select "GSM/WCDMA/LTE" network mode in phone Settings (Settings -> Network -> More -> Mobile Networks -> Network Mode)!
    To change network mode it is necessary to insert working SIM! Also phone must be unlocked!
    "Repair network" operation works only for phones with non-signed (without signatures) firmware versions. For example: "Repair Network" operation won't work for LG LS775 phone with ZV8 (Android 7.0) firmware.

* All supported operations described in details in software manual ("Cable & Manual" button in the software).