Medusa PRO Software v.1.3.4 is out!
Added Factory Repair (Boot) for Sony devices.
Added support for Samsung SM-A500FU, Samsung SM-J700F, Huawei G630-U10, Sony D2303, Sony D5503, Sony D6603 via eMMC and support for OPPO A31 via USB.
Added possibility to set extended options for boot operation mode.
Uploaded new “Live logs” in to the Support Area.
Medusa PRO Software v.1.3.4 Release Notes:
- Sony Factory Repair feature has been released!You can try to repair boot on Sony devices via eMMC by using original Sony firmware («*.ftf» and "*.SIN_FILE_SET" versions of firmware are supported)This feature can be useful in case, if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported. Note, device should have non-damaged native TA (Trim Area), otherwise device will not be repaired. We recommended to make backup of TA before repairing. Also, software will automatically try to detect and backup (read) TA partition from the phone to «Backup» folder before repairing.
- Added support for the following models via eMMC:
- Samsung SM-A500FU - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
- Samsung SM-J700F - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
- Huawei G630-U10 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
- Sony D2303 - added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files
- Sony D5503 - added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files
- Sony D6603 - added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files
Added support for the following models via USB:
Box firmware has been updated to 1.16 version! In 1.16 firmware version we have improved eMMC connection and eMMC Read operations.
To update firmware automatically, it is necessary to connect the Box and only then run the software.
Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Medusa Pro software
Medusa card firmware has been updated to 2.5 version!
To run Medusa Pro Software v.1.3.4 and future versions, it is necessary to update card firmware.
Also note, that after updating card firmware to v.2.5, it won’t be possible to run older Software versions
* Note: device should have non-damaged native TA; otherwise device will not be repaired
Download Medusa PRO Software v.1.3.4