:تحديثــات: Octoplus JTAG PRO Software v.1.3.4 Release Notes

Octoplus JTAG PRO Software v.1.3.4 Release Notes

    Sony Factory Repair feature has been released!

    You can try to repair boot on Sony devices via eMMC by using original Sony firmware («*.ftf» and "*.SIN_FILE_SET" versions of firmware are supported)
    This feature can be useful in case, if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported.
    Note, device should have non-damaged native TA (Trim Area), otherwise device will not be repaired. We recommended to make backup of TA before repairing.
    Also, software will automatically try to detect and backup (read) TA partition from the phone to «Backup» folder before repairing.

    Added support for the following models via eMMC:

        Samsung SM-A500FU – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
        Samsung SM-J700F – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
        Huawei G630-U10 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
        Sony D2303 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files
        Sony D5503 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files
        Sony D6603 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files

    Added support for the following models via USB:

        OPPO A31 – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    Added possibility to set extended options for boot operation mode.
    From now on you can set the following options: «Boot partition enable», «Boot ACK», «Boot bus width», «Reset boot bus conditions» and «Boot mode»

    Box firmware has been updated to 1.16 version! In 1.16 firmware version we have improved eMMC connection and eMMC Read operations

    To update firmware automatically, it is necessary to connect the Box and only then run the software.
    Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Octoplus JTAG Pro software

    Octoplus card firmware has been updated to 2.5 version! To run Octoplus JTAG Pro Software v.1.3.4 and future versions, it is necessary to update card firmware.
    Also note, that after updating card firmware to v.2.5, it won’t be possible to run older Software versions

    Uploaded Full flash for Huawei G620S-L01 into the Support Area

    Uploaded new “Live logs” into the Support Area

    Added more detailed operations’ logging

    Improved work (parsing) with pit files

    All pinouts and Repair procedures described in the manual ("Help" button in the software)


* Note: device should have non-damaged native TA; otherwise device will not be repaired