[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة] 
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة] 
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة] 
Infinity-Box Chinese Miracle-2 (Release) MTK/MediaTek v1.02 released

MT6571 NAND/eMMC support, Generic 6571/6572 NAND support

MediaTek SP Platform:
Activated NAND support on following CPU:
.MT6571
.MT6572
Supported features:
.Flash Read
.Format FS: Cache, UDA, UDA+CACHE
.Read Info/Check

Activated eMMC support on following CPU:
.MT6571

Other:
.FlashInit: support some models with not active Preloader or erased Flash
.HSUSB: Init fast flashing / flash reading if phone have not active Preloader or Flash erased
.Format FS procedure improved
.Compile Info extraction improved
.FullFlash Dump Integrity check during Read/Write
.FlashID database updated
.SP FlashLoaders updated

MediaTek FP Platform:
MT6260, MT6261, MT625A: Format FS procedure revised
MT6260, MT6261: Empty (Blank) FlashIC support


- Official download link and discussion thread:



[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
 
server1 download area

Test report:

Check/Info

Code:
Card found: S/N *******
Chinese Miracle II [MTK module] v 1.01b

Operation : Check / Read Info [ v1.01b ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : EFC1B4618B995BC946E9710B8E80CCBC
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 ,
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS : 0x003FE000 , 0x00002000

Done!
Elapsed: 00:00:06
Reconnect Power/Cable!
Read Flash Only In 14 Sec [ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

Code:
Operation : Read Flash [ v1.01b ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : EFC1B4618B995BC946E9710B8E80CCBC
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 ,
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS : 0x003FE000 , 0x00002000
Reading Flash Conent now ...

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : FLYCOM61D_11C_M872_PCB01_gprs_MT6261_S01.MAUI_11C_W13_52_MP_V2_F1.bin
FileVersion : MAUI.11C.W13.52.MP.V2.F1
Saved to : C:\Documents and Settings\Administrator\Desktop\mtk\Read_out\FLYCOM61D_11C_M872_PCB01_gprs_MT6261_S01.MAUI_11C_W13_52_MP_V2_F1.bin

Done!
Elapsed: 00:00:14
Reconnect Power/Cable!
Format FFS

Code:
Operation : Format FileSystem [ v1.01b ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : EFC1B4618B995BC946E9710B8E80CCBC
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 ,
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS : 0x003FE000 , 0x00002000

Backup done
Executing FFS FORMAT now...
FAT_RANGE : 0x003B7000-0x003FDFFF , LEN : 0x00047000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!
Write Flash

Code:
Load File
File_Info : FLYCOM61D_11C_M872_PCB01_gprs_MT6261_S01.MAUI_11C_W13_52_MP_V2_F1.bin
FileVersion : MAUI.11C.W13.52.MP.V2.F1
Load File Ok

Operation : Flash [ v1.01b ]

======= Flash
Files set for flashing :
[ MCU ] : FLYCOM61D_11C_M872_PCB01_gprs_MT6261_S01.MAUI_11C_W13_52_MP_V2_F1.bin

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : EFC1B4618B995BC946E9710B8E80CCBC
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 ,
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS : 0x003FE000 , 0x00002000

File_Info : FLYCOM61D_11C_M872_PCB01_gprs_MT6261_S01.MAUI_11C_W13_52_MP_V2_F1.bin
FileVersion : MAUI.11C.W13.52.MP.V2.F1
Flash now

Erase region , wait ...
Write data , wait ...
Write : FLYCOM61D_11C_M872_PCB01_gprs_MT6261_S01.MAUI_11C_W13_52_MP_V2_F1.bin

Done!
Elapsed: 00:00:42
Reconnect Power/Cable!
Repair Security (Imei)

Code:
Operation : Repair Security [ v1.01b ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
[ERROR] : DONE
BB_CPU_SN : UNKNOW [ READ ERROR ]
BROM Protocol Version : 05
Setting Service Mode ...
Init Ok, waiting for phone ...
Phone Initial Info :
BB : MT6261
SW : MAUI.11C.W13.52.MP.V2.F1
HW : Spice M-5408
IMEI[1] : 000000000000000
IMEI[2] : 000000000000000
Update IMEI[1] to : 911347506087165
Update IMEI[2] to : 911347506087173
Done!

Done!
Elapsed: 00:00:32
Reconnect Power/Cable!

Reset User Code

Code:
Operation : Reset UserCode [ v1.01b ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : EFC1B4618B995BC946E9710B8E80CCBC
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 ,
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS : 0x003FE000 , 0x00002000

Backup exists , skip
Read ExtData
Sorting ExtData
Sort Ok, Rebuild Ok
Restore ExtData
All done
UserCode request removed
UserCode set to default ( 0000 or 1122 )

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!

[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]