Huawei Ascend Y600-U20 Firmware, this firmware is already tested. You can check out the comment box for confirmation.
Firmware Here
:abcc2:
Huawei Y600-U20
VCOM Driver
:abcc2:
Manual Install Driver
Alternative Driver
:abcc2:
AutoInstaller
SPFlashTool
:abcc2:
SPFlashTool
"Extract the files to your desired folder"
Installing Driver
You need to install the driver manually. You need to go to device manager and when there is a new device detected install the proper driver. Must be quick when the new device is detected, it will only last 3 seconds in some devices.
Reference Video for Installing Driver
Reference Video Flashing your phone
Flashing
1. Launch FlashTool
2. Click on Scatter-Loading, and load your scatter file. (see example below with loaded file in Flash Tool
3. After you load the file, press F9 or Press Download to Flash your Phone.
4. If Download is not possible, you can press Firmware Upgrade.
4. If Download is not possible, you can press Firmware Upgrade.
5. After you press Download or Firmware Upgrade re-insert your battery and connect your Phone to the PC. Press Volume Down or Volume Up while connecting to PC.
