Octoplus JTAG Software v.1.8.0 Plus_cap
Octoplus JTAG Software v.1.8.0 is out!

We have added boot repair via USB and small TP for LG D618, F240K, F240L, F240S and via JTAG for Samsung GT-S5302!

Octoplus Box JTAG Software v.1.8.0 Release Notes


  • Added support for the following models:

- LG D618 - added Dead Boot/Device Repair via USB
- LG F240K - added Dead Boot Repair via USB
- LG F240L - added Dead Boot Repair via USB
- LG F240S - added Dead Boot Repair via USB
- Samsung GT-S5302 - added Dead Boot/Device Repair


  • All pinouts and Repair procedures are described in the manual ("Help" button in Software)



To repair LG D618, F240K / L / S via USB, please follow the next three steps:
[list="list-style-type: decimal"]
[*]Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)

[*]Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB

[*]Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
[/list]


Octoplus JTAG Software v.1.8.0 Plus_line



Octoplus JTAG Software v.1.8.0 Plus_line



Octoplus JTAG Software v.1.8.0 Plus_line
Download Octoplus Box JTAG Software v.1.8.0